Barry-Allen The 2° Flash New Multiboot for DM-7025
Quote:
================================================== == Barry Allen for Dreambox 7025 ================================================== == Version 0.2.2 by gutemine from 22.04.2007 ================================================== == Release infos ================================================== == 0.1.0 first official Version 0.1.1 add LCD support, copy, rename and erase 0.2.0 add backup and more tools options 0.2.1 bugfixes 0.2.2 quod erat demonstrandum ================================================== == Thanks to noggie for his nfi file tools ! ================================================== == The English Documentation is below the German one ================================================== == 1) Prerequisites ---------------- During the installation there has to be CF card in the Dreambox (attention: insert or remove into Dreambox 7025 cardreader only when Dreambox is turned off), or an USB stick which is successfully detected (in case of problems try an USB Hub). If Barry Allen on USB is used then put preferably the CVS Image from OoZooN in Flash, because this image has the USB drivers permanently built into the kernel. If neither CF card not USB Stick are attached then installation takes place on the Harddisk. Because the images then also run from there it will run permanently and it could be necessary that you disable Harddisk Standby in the images to allow running Barry Allen stable from Harddisk. 2) Installation --------------- First boot from Flash and then copy the file enigma2-plugin-extensions-barryallen*.ipk to /tmp with ftp (TCP/IP must be working already). If you have an image in Flash that offers a Blue Pannel Manual Addon Install, then you can use this functionality to install the ipk file. If not, then install Barry Allen by entering the following commands in a Telnet session: cd / ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk Then restart enigma2 and the Barry Allen Plugin shoudl show up under Games / Plugins. In the Images installed by Barry Allen you don't have to install the Barry Allen Plugin anymore. The Barry Allen Plugin integrates himself into then automatically during the image extract. And you can remove Barry Allen if you are booted from Flash: ipkg remove enigma2-plugin-extensions-barryallen 3) Usage -------- There is now the enigma2 Plugin of Barry Allen included under Games / Plugins of the enigma2 menu, which offers the full functionality of Barry Allen. For extracting of nfi images in Barry Allen copy the image files to /MB_Images (normally a link to /media/hdd/MB_Images created during Barry Allen installation) If there are Problems with image extraction or other tasks with the enigma2 plugin try doing it in telnet: cd /media/ba ba.sh extract nameoftheimage On the next reboot this new Image should be available in the bootmanager for choosing to boot it and then it can be customized and used as usual. The Bootmanager now should remember the last booted image and hence recordings from Deepstandby should work now. ================================================== == Have Fun using Barry Allen on the Dreambox 7025 !!!! ================================================== == ITALIANO Quote: Prerequisiti -------------- Nel corso dell’installazione vi deve essere una Compact Flash inserita nel Dreambox 7025 (Attenzione: mettere e togliere la CF solo a Dreambox spento), oppure una penna USB riconosciuta (in caso di problemi frapporre un Hub USB). Se si utilizza Barry Allen su una penna USB, mettere preferibilmente in flash una immagine CVS da OozooN, in quanto questa immagina ha permanentemente inseriti nel kernel i driver USB. Se non sono presenti né la CF né la penna USB l’installazione ha luogo sul disco. Poiché le immagini che saranno avviatte da disco saranno permanentemente attive, dovrà essere disabilitato lo stanby del disco. 2)Installazione ------------------ Eseguire il boot da flash, e copiare il file enigma2-plugin-extensions-barryallen*.ipk in /tmp mediante ftp. Se si dispone di un’immagine in flash che prevede l’installazione manuale tramite Blue Pannel, utilizzarla per installare il file ipk. Se no, tramite telnet ****tare: cd / ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk Far ripartire enigma2 e tra i giochi/plugins dovrebbe comparire il plugin Barry Allen Tutte le immagini installate successivamente tramite Barry Allen avranno nel loro interno già installato il plugin Barry Allen: questi provvede ad integrarsi automaticamente nel corso dell’estrazione dell’immagine.Non saranno quindi necessarie ulteriori attività. E’ possibile rimuovere il plug-in Barry Allen quando si è eseguito il boot da flash, tramite: ipkg remove enigma2-plugin-extensions-barryallen 3) Utilizzo ------------- Nel menù Giochi/Plugins vi è incluso Barry Allen che offre le opzioni info, boot, extract e restart. Per estrarre una immagine nfi in Barry Allen copiare le immagini nella directory /MB_Images (normalmente un link a /media/hdd/MB_Images creato durante l’installazione di Barry Allen) Se vi sono problemi con l’estrazione di immagini tramite il plugin di enigma2, provare tramite telnet: cd /media/ba ba.sh extract nomedellaimmage Al successivo riavvio questa immagine sarà disponibile nel Bootmanager per la scelta del boot e potrà essere personalizzata ed usata normalmente. Il Bootmanager ricorda l’ultima immagine utilizzata per il boot, per cui dovrebbero funzionare le registrazioni dallo stato di Deepstandby (questa non l'ho capita proprio bene) ================================================== == Have Fun using Barry Allen on the Dreambox 7025 !!!! ================================================== == Ultima versione su I HAD Saludos. |
Barry Allen para Dreambox 7025
================================================== == Version 0.3.0 por gutemine de fecha 29.04.2007 ================================================== == Informacion de versiones ================================================== == 0.1.0 primera version oficial 0.1.1 anadido soporte para el LCD, copiar, renombrar y borrar 0.2.0 anadido salvar (guardar) imagen y mas opciones de herramientas 0.2.1 arreglo de bugs 0.2.2 quod erat demonstrandum 0.3.0 WebIF y Wizzards ================================================== == Gracias a Noggie por su herramienta de archivos nfi! ================================================== == 1) Pre-requisitos Durante la instalacion deberas tener una Compact Flash (CF) en la Dreambox (Cuidado: introduce o saca la CF del lector de tarjetas CF solo cuando la Dreambox este apagada), o un Lapiz USB que haya sido detectado (en caso de problemas prueba con un hub USB). Si usas Barry Allen con un Lapiz USB entonces pon la Imagen CVS de Oozoon en la flash, porque esta imagen tiene los controladores de USB permanentemente cargados en el kernel. Si ninguna CF o Lapiz USB es detectado entonces la instalacion se hace en el Disco Duro. A causa de que las imagenes tambien correran desde ahi, este permanecera encendido y podria ser necesario deshabilitar el "standby" del Disco Duro en la imagen para permitir que Barry Allen sea estable desde el Disco Duro 2) Instalacion Primero arranca desde la Flash y despues copia el archivo enigma2-plugin-extensions-barryallen*.ipk en /tmp por ftp (el Protocolo TCP/IP ya deberia estar funcionando): Si tienes una imagen en Flash que te ofrece la instalacion manual desde el "Blue Panel", entonces puedes usar esta funcionalidad para instalar el archivo ipk. Si no, entonces instala Barry Allen introduciendo el siguiente comando por telnet cd / ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk Reinicia enigma2 y el Plugin de Barry Allen deberia aparecer en el menu Juegos/Plugins En las imagenes instaladas por Barry Allen no tendras que instalarlo nunca mas. El Plugin de Barry Allen se integra a si mismo automaticamente durante la extraccion de la imagen. Y puedes desinstalar Barry Allen si estas arrancado desde la Flash: ipkg remove enigma2-plugin-extensions-barryallen 3) Uso Ahora tenemos el plugin enigma2 de Barry Allen incluido en el menu Juegos/Plugins del menu de enigma2 que nos ofrece toda la funcionalidad de Barry Allen. Para extraer (instalar) las imagenes con Barry Allen copia los archivos de imagenes en /MB_Images (normalmente se habra creado un enlace a /media/hdd/MB_Images durante la instalacion de Barry Allen) Si hay algun problema con la extraccion (instalacion) u otras cosas con el plugin enigma2 intentalo desde telnet: cd /media/ba ba.sh extract nombredelaimagen En el siguiente reinicio esta nueva imagen deberia estar disponible en el bootmanager para elegirla para arrancar y poder arreglarla a tu gusto. El Bootmanager ahora deberia recordar la ultima imagen arrancada y por lo tanto las grabaciones desde el apagado profundo deberian funcionar. ================================================== == Diviertete usando a Barry Allen en tu Dreambox 7025 !!!! ================================================== == |
La franja horaria es GMT +2. Ahora son las 21:44. |
Powered por vBulletin™ Version 3.8.10
Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.
Traducido por vBsoporte - vBulletin en español
ZackYFileS - Foros de Debate