MemSize: ......................... 8M
Flash detected @0xbe000000

Signature: a806


Broadcom BootLoader Version: 2.1.6d release Gnu
Build Date: Apr 29 2004
Build Time: 17:54:32

Image 1 Program Header:
Signature: 3349
Control: 0000
Major Rev: 0003
Minor Rev: 0000
Build Time: 2006/11/3 02:33:33 Z
File Length: 880468 bytes
Load Address: 80500000
Filename: 5101hack_mod_by_FERCSA.bin
HCS: c6fe
CRC: c19cfc6c

WARNING: Signatures do not match! Don't use this image!

Image 2 Program Header:
Signature: a806
Control: 0005
Major Rev: 0400
Minor Rev: 04ff
Build Time: 2005/9/7 03:44:24 Z
File Length: 773865 bytes
Load Address: 80010000
Filename: ecram_sto.bin
HCS: 5dcc
CRC: 716e3498



Enter '1', '2', or 'p' within 2 seconds or take default...
. .

Performing CRC on Image 2...
Detected LZMA compressed image... decompressing...
Target Address: 0x80010000
............
Decompressed length: 3145803

Executing Image 2...

a nosotros nos aparece directamente aqui:
eCos - hal_diag_init

Init device '/dev/ttydiag'

Init tty channel: 80808f38

Init device '/dev/tty0'

Init tty channel: 80808f58

Init device '/dev/haldiag'

HAL/diag SERIAL init

Init device '/dev/ser0'

BCM 33XX SERIAL init - dev: 0.2

Set output buffer - buf: 80875408 len: 2048

Set input buffer - buf: 80875c08 len: 2048

BCM 33XX SERIAL config



0x00000014 [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target) Configuring/Loading Flash driver...
0x00000014 [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target) Loading ProgramStore driver...
0x0000001e [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target) Loading BootloaderStore driver...
0x00000028 [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target) Loading NonVol driver...
0x00000028 [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target) Storage drivers initialized successfully.
0x00000032 [tStartup] BcmBfcStdEmbeddedTarget::InitDeviceAbstractions: (BFC Target) Creating singletons for ProgramStore/BootloaderStore/NonVol devices...
Detecting the next image number that we will store to by default...
0x3c Computing CRC32 over image2 to ensure that it is valid...
sigo investigando