Hola a todos,

sigo batallando con el problema del bloqueo del deco, la luz verde encendida, no responde al mando. Puedo conectarme a través del cable serie al deco y con el programa loader para el mini no tengo ningún problema para instalar cualquier firmware, pero siempre cuando acabo de instalar el firmware sin problemas no se reinicia, con lo que me encuentro otra vez que la luz verde esta fija y no hace caso del mando. Me he conectado con el programa Hyperterminal para ver que es lo que hace cuando arranca y me sale esta parrafada:

BO

Boot V2.7

Phase Scan in Boot Start Stage

200000

Phase Scan in Set Parameters Stage

30, 10, 13, 05, 08,
10, 24, 24, 16

[ 2 0 0 0 ff ff ff ]
0x32 0x32 0x32
DDR3

DDR/PLL Init Done

L2 cache Init Done

Boot start

SPI Load Code done

CPUfreq 400000 DRAMSize 1024
BootManager V1.7

>> Pressing <space> key enter boot-menu.

>> Load code from SPI...

>> Check image parity...

>> Unzip Image Start....

>>

App Start...

[cyg_net_init] Init: mbinit(0x00000000)
[cyg_net_init] Init: cyg_net_init_devs(0x00000000)
Init device 'eth1'
[cyg_net_init] Init: loopattach(0x00000000)
[cyg_net_init] Init: ifinit(0x00000000)
[cyg_net_init] Init: domaininit(0x00000000)
[cyg_net_init] Init: cyg_net_add_domain(0x80aac030)
New domain internet at 0x00000000
[cyg_net_init] Init: cyg_net_add_domain(0x80aabb24)
New domain route at 0x00000000
[cyg_net_init] Init: call_route_init(0x00000000)
[cyg_net_init] Done
Uart initialize Success
init time1 interrupt
init time2 interrupt
init time3 interrupt
init time4 interrupt
init time5 interrupt
MPLL frequency = 399999916


{DRV_FLASH_Initialize} Manufactory Code=0x1C, DeviceID=0x16
Flash Pass
target frequency = 13880, I2C Clock Div = 22a
I2C0 Pass
target frequency = 30d40, I2C Clock Div = dd
I2C2 Pass
FP Pass
 >>>_drv_init,941,At boot, ID=0, Wakeup event=0x0 
STBC Misc Pass
STBC IPC Pass
STBC IO Pass
STBC RTC Pass
STBC PBC Pass
STBC Ir Pass
E2P Pass
ADC Pass
NIM0 start to INIT O
NIM0 pass !
NIM1 start to INIT O
[src/board/dr78326su_v30/plat_ini.c]NEO Pass









NEOWINE Init Success!
S NIM Pass
TSPU Pass
STC Pass
VDEC Pass
pCapBits :2c09
ADEC Pass
Video Layer 1 Pass
Video Layer 2 Pass
Video OSD 1 Pass
Video OSD 2 Pass
Cursor 1 Pass
Blit Pass
JPU Pass
DeviceName = VMIX0
VMIX Pass
TVE Pass
DeviceName = VTG0
VTG Pass
Pin collision with PFCR: Port:J, Bit:0x10
Result: **** PASS ****
1.0: DRV_SMC_Initialize() = SMC_OK
-->DRV_ETH_Init PASS
<<< start to do USB initial >>>
Creat MAU Interrupt Done
8051 Boot and goto While 1 loop ~~~~~


[KRU] b0da00b2
[36;48m STBC SW Date:1018182012 
 STBC SW Ver:26198 



FP_EventSubscribe: Handle = 810b7ad8
>> PBC Open
DeviceName = VMIX0
DeviceName = VTG0
VTG_SetMode, VTGTiming => 2001
 >>>_plat_init,2026,At boot, ID=0, Wakeup event=0x0 
BMT[01]=00, del=00
BMT[02]=01, del=00
BMT[03]=02, del=00
BMT[04]=03, del=00
BMT[05]=04, del=00
BMT[06]=05, del=00
BMT[07]=06, del=00
BMT[08]=07, del=00
BMT[09]=08, del=00
BMT[0a]=09, del=00
BMT[0b]=0a, del=00
BMT[0c]=0b, del=00
irq_num = 35 controller added
ehci_local0: EHCI version 1.0, with 1 ports.........
ehci_local0: USB revision 2.0
ehci_local0: new device port=0 depth=0 speed=high
uhub0
uhub0: 1 port with 1 removable, self powered
maintask:MID_INI_Initialize success

NvtWifi_RegisterConnectCallback pfCb=0x803ff130
NvtWifi_RegisterDisconnectCallback pfCb=0x803ff168
Now init app nvm 7520 3222

CheckVersion=1,NSCheckData = 0

EN_APP_NVM_NO_ERROR
maintask: after APP_NVM_Init

No such table in sharebank !table id=0xc0
IR initialze error
MID_EZM_GetCustomizeParam 0
irq_num = 36 controller added
ehci_local1: EHCI version 1.0, with 1 ports.........
ehci_local1: USB revision 2.0
ehci_local1: new device port=0 depth=0 speed=high
uhub1
uhub1: 1 port with 1 removable, self powered
os_notify: Host bus 80a6e79c going into suspend
uhub1: new device port=1 depth=1 speed=high
ucompdev0
jusbWifi_match_proto: UMATCH WIFI Dongle


=== pAd = 0x8123c4c0, size = 1053152 ===

rausb_buffer_alloc size=122884
rausb_buffer_alloc size=122884
rausb_buffer_alloc size=122884
rausb_buffer_alloc size=122884
rausb_buffer_alloc size=3844
rausb_buffer_alloc size=3844
rausb_buffer_alloc size=16384
rausb_buffer_alloc size=16384
rausb_buffer_alloc size=16384
rausb_buffer_alloc size=16384
rausb_buffer_alloc size=16384
rausb_buffer_alloc size=16384
rausb_buffer_alloc size=16384
rausb_buffer_alloc size=16384
<-- RTMPAllocTxRxRingMemory, Status=0
############# RESET ALL CB
<-- RTMPAllocAdapterBlock, Status=0
NvtWifi_GetInsCallback = 0x803ff098
NvtWifi_GetRemCallback= 0x803ff0e8
NvtWifi_GetConnectCallback= 0x803ff130
NvtWifi_GetDisconnectCallback= 0x803ff168
Init USB Dev Config
Open USB Pipe
Init USB Dev Config End
USB Init net_dev=0x80a3d43c
CMD_RTPRIV_IOCTL_USBDO_INS_CB call USB insert callback pAd->usbInsCb=0x803ff098
src/internet/mid_net.c,mid_LinkUp_Callback,947:enDev=1,enErr=0
320 NOT Support this fucntion : LAYER_DISP_SetBorder
>>>>>>>>>>>>>>LAYER_DISP_SetVideoWindow0)
InHs:0, InVs:0, InHw:720, InVw:480
OutHs:120, OutVs:44, OutHw:720, OutVw:480
SrcW:720, SrcH:480, WindowWidth:0


LAYER_DISP_DisplayCtrl, 0, 0

Receive Stop command and Notify,command[0]

Receive Stop command and Notify,command[0]
320 NOT Support this fucntion : LAYER_DISP_SetBorder
>>>>>>>>>>>>>>LAYER_DISP_SetVideoWindow1)
InHs:0, InVs:0, InHw:720, InVw:480
OutHs:120, OutVs:44, OutHw:720, OutVw:480
SrcW:720, SrcH:480, WindowWidth:0


LAYER_DISP_DisplayCtrl, 1, 0

[ APool] handle:0x84f2da20, range:0x84e6d9a4-0x84f2d994, total:786432, free:79984, minfree=79984
[0000, free]: begin: 0x84e6d9a4, size: 79984
[0001, allocated]: begin: 0x84e81214, size: 196880
[0002, allocated]: begin: 0x84eb1324, size: 1056
[0003, allocated]: begin: 0x84eb1744, size: 82192
[0004, allocated]: begin: 0x84ec5854, size: 131344
[0005, allocated]: begin: 0x84ee5964, size: 32800
[0006, allocated]: begin: 0x84eed984, size: 262160

[DDC_DEC] mid_ddc_SetAudioType err
[DDC_DEC] mid_ddc_StartAudioDecoding err
----------MID_DDC_OpenTuner 0------------------


----------MID_DDC_OpenTuner 1------------------


----------MID_DDC_OpenTuner 0------------------

 PowerOn = 0 

-----------------------CID!!!!1---f9------------------------


OTP_VerifyProcess: VerifyProcess Success



maintask: mac from SettingPara:0 a eb 15 54 7

maintask--> order id = 0D0609

maintask--> customer id = 658877


APP_Ctrl_Web_Init start!!!!1
Cannot engage Mobile font: ArInitFont () failed
error code (see bi_lib.h BI_ERROR_xxx): -51
normal get default cfg=0
###enter normal
[MMI] vid support enDecType[0xc]
[MMI] vid support enDecType[0xd]
[MMI] vid support enDecType[0xe]
[MMI] vid support enDecType[0xf]
[MMI] vid support enDecType[0x10]
[MMI] vid support enDecType[0xc]
[MMI] vid support enDecType[0xd]
[MMI] vid support enDecType[0xe]
[MMI] vid support enDecType[0xf]
[MMI] vid support enDecType[0x10]
[MMI] vid support enDecType[0x0]
[MMI] vid support enDecType[0x1]
[MMI] vid support enDecType[0x2]
[MMI] vid support enDecType[0x3]
[MMI] vid support enDecType[0x4]
[MMI] vid support enDecType[0x5]
[MMI] vid support enDecType[0x6]
[MMI] vid support enDecType[0x7]
[MMI] vid support enDecType[0x0]
[MMI] vid support enDecType[0x1]
[MMI] vid support enDecType[0x2]
[MMI] vid support enDecType[0x3]
[MMI] vid support enDecType[0x4]
[MMI] vid support enDecType[0x5]
[MMI] vid support enDecType[0x6]
[MMI] vid support enDecType[0x7] smc


1





ok









998 chip

sds build Sep 9 2013 21:07:48

wujiang-->nvramSettingParamGet:u16MsgLanguage = 32773,line = 1227

######### rt_ecos_start
MainVirtualIF_open pAd=0x8123c4c0
VIRTUAL INTERFACE UP number = 0
rt28xx_open pAd=0x8123c4c0
Start WIFI Driver rt28xx_init
rt28xx_init read MAC version
MAC_CSR0 [ Ver:Rev=0x53900502]
rt28xx_init RT28XXDMADisable
rt28xx_init RTMPInitTxRxRingMemory
rt28xx_init RtmpMgmtTaskInit
######## Attach pTask pTask->stack=0x8117d578
######## Attach pTask 1
######## Attach pTask->threadID=0x8117d458
######## Attach pTask pTask->stack=0x8117c318
######## Attach pTask 1
######## Attach pTask->threadID=0x8117c1f8
######## Attach pTask pTask->stack=0x8117b0d8
######## Attach pTask 1
######## Attach pTask->threadID=0x8117afb8
RTMP_TimerListAdd: add timer obj 812e9e60!
RTMP_TimerListAdd: add timer obj 812e9e98!
RTMP_TimerListAdd: add timer obj 812e9ed0!
RTMP_TimerListAdd: add timer obj 812e9e28!
RTMP_TimerListAdd: add timer obj 812e9d80!
RTMP_TimerListAdd: add timer obj 812e9db8!
RTMP_TimerListAdd: add timer obj 81271f94!
RTMP_TimerListAdd: add timer obj 8123e534!
RTMP_TimerListAdd: add timer obj 8123e574!
RTMP_TimerListAdd: add timer obj 81272050!
RTMP_TimerListAdd: add timer obj 81271f24!
RTMP_TimerListAdd: add timer obj 81272014!
######### Clear fOP_STATUS_INFRA_ON 3
rt28xx_init RtmpNetTaskInit
########## RtmpNetTaskInit net_dev=0x80a3d43c
-->RTUSBVenderReset
<--RTUSBVenderReset
RTMPSetProfileParameters set WPA_802_1X_PORT_NOT_SECURED
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 0
rt28xx_init 1.Phy Mode = 0
2. Phy Mode = 0
rt28xx_init 2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
rt28xx_init 3.Phy Mode = 0
<Not a string: 0x80B8E950>AsicSetRxAnt, switch to main antenna
RTMPSetPhyMode: channel is out of range, use first channel=1
bAutoTxAgcG = 0
rt28xx_init NumOfBulkInIRP = 1
<==== rt28xx_init, Status=0
<==== rt28xx_init, Status=0
clear garbage interrupts 0x1300 = 00073200
######### rt_ecos_start end


Create Instant Delay Queue OK

========= MID_InstantDelay_Initial SUCCESS ===========


DEV_SCART_SetTVType 16:9.



DEV_SCART_SetVideoFormat CVBS.
>>>>>>>>>>>>>>LAYER_DISP_SetVideoWindow0)
InHs:0, InVs:0, InHw:720, InVw:480
OutHs:120, OutVs:44, OutHw:720, OutVw:576
SrcW:720, SrcH:576, WindowWidth:0





DEV_SCART_SetTVType 16:9.
>>>>>>>>>>>>>>LAYER_DISP_SetVideoWindow1)
InHs:0, InVs:0, InHw:720, InVw:480
OutHs:120, OutVs:44, OutHw:720, OutVw:576
SrcW:720, SrcH:576, WindowWidth:0





DEV_SCART_SetTVType 16:9.



DEV_SCART_SetTVType 16:9.
>>>>>>>>>>>>>>LAYER_DISP_SetVideoWindow0)
InHs:0, InVs:0, InHw:720, InVw:480
OutHs:120, OutVs:44, OutHw:720, OutVw:576
SrcW:720, SrcH:576, WindowWidth:0





DEV_SCART_SetTVType 16:9.
--- IK -create handle error--- 2

--- IK -create handle error--- 2

Alguien sabe que significa? Hay alguna manera de recuperar el deco o ya esta para tirarlo?

Muchas gracias y saludos